One-line value prop: Fast, accurate slab cutting, miters, and bevels with live 3D preview on true 5-axis (X-Y-Z + C table + A tilt).
Who uses it: Stone fabricators, countertop shops, monument makers, tile & architectural stone.
Works with: 5-axis bridge saws using a diamond disk/blade (linear X-Y-Z + rotary C and tilting A).
Compatible controllers: PC-SMART 4A / PC-SMART 3AS / PC-PRO LAN 4A
Supported files: DXF and standard G-code (e.g., ArtCAM / PowerMill posts)
Axes: X, Y, Z linear; C table rotation; A blade tilt (0–90°) for miters/bevels.
Operations: Straight cuts, step-cuts, angle cuts, arcs/segments, slotting & trimming.
3D work envelope with homing, soft limits, and Safe-Z park.
Teach-in points: build cut lists from on-table points with Add Point.
Smooth step/dir motion with look-ahead; per-axis feed & step inputs on screen.
Mapped outputs for Spindle (saw motor), Coolant/Water, pump/bleed, beacons, alarms.
Safety interlocks: door/guard, pressure/flow OK, E-stop chain, over-travel.
Optional laser line/pointer support for quick edge alignment.
Import DXF, or sketch rectangles, circles, polygons in Landscape then export to run.
Per-segment A/C angles, feed (V), and step-cut depth; automatic multi-pass slicing.
3D preview of slab, tool and path; simulate or dry-run (outputs off).
Sheet/part align & rotate on table; set multiple reference points.
Resume from last G-code line after a stop or power loss (safe re-entry checks).
Job logging: time, length, miters, pauses/alarms; notes saved with the file.
5-axis linkage: X-Y-Z + C rotate + A tilt
DXF & Landscape workflow with teach-in Add Point
Step-cutting, miters/bevels, arcs/segments
3D view, dry-run, single-block step
Full interlocks, Safe-Z, automatic job reports
Open DXF or design in Landscape; send to the controller.
Set origin, slab thickness, feeds/steps; apply A/C angles for miters/rotations.
Use Add Point to teach cut locations or adjust alignment (laser optional).
Simulate / Dry-run, verify limits and sequence.
Run the job; the system manages step-cuts, coolant, and spindle/pump I/O.
If interrupted, resume from last line; save the report for traceability.
Coordinate XYZ + up to three rotary axes (A/B/C) across wood, stone, milling, mold-making, and dental machines—up to 6 simultaneous axes.
Keeps the tool tip exactly on the programmed path during 5-axis rotations—no re-posting when you change head lengths or pivots.
Run spindles synchronously or sequentially with per-spindle ON/OFF, RPM, offsets, and tool numbers.
Works with linear, rotary/carousel, and jack magazines—full clamp/unclamp sequencing, interlocks, tool table, and safe recovery.
Touch-setter cycles capture tool length (and optional diameter) for accurate depths and wear compensation after each change.
Preview the job in true 3D with live A/B/C angles to verify reach, orientation, and motion before cutting.
Enforces a maximum Z penetration so the tool never cuts past the programmed floor—protects the table, fixtures, and laminated stacks.
Real-world clips of Radonix interfaces on production machines—setup, operation, quality tips, and quick troubleshooting.
These are the Radonix CNC controllers designed to work best with this interface. Choose the recommended controller.
Radonix hardware for XYZCA Disk :
