Radonix interface
3-Axis Stone CNC Controller for Cutting & Routing
Three-axis stone routing, profiling, drilling and engraving with DXF/G-code workflows, controlled depth and process-safe recovery.
- Axes
- 3-Axis
- Machine class
- Three-axis CNC stone routers and profiling machines
- Input
- DXF and standard G-code (e.g., ArtCAM / PowerMill posts)
- Controllers
- PC Smart 4APC Smart 3ASPC-Pro LAN 4A
01
Interface profile
Introduction
With CAM-Pro and compatible Radonix controller hardware, the XYZ CNC controller interface is designed for three-axis stone routing, profiling, drilling and engraving machines.
- Who uses it
- Stone fabricators, monument workshops, architectural-stone producers and machine builders.
- Works with
- Three-axis XYZ stone routers, profiling machines and engraving systems with configured spindle, coolant and safety I/O.
- Compatible controllers
- PC Smart 4APC Smart 3ASPC-Pro LAN 4A
- Supported files
- DXF and standard G-code (e.g., ArtCAM / PowerMill posts)
- Important
- This interface is dedicated to three-axis stone routing, profiling, drilling and engraving.
02
Machine architecture
Machine & Kinematics
Machine & Kinematics
- Three-axis XYZ contouring with homing, soft limits and work offsets (G54–G59).
- Three-axis toolpath control keeps routing, profiling, drilling and engraving motion within the configured XYZ work envelope.
- Configured spindle and coolant outputs provide process-ready, speed and safety interlocks.
- Configured tool-length, Z-reference and safe-retract routines support repeatable stone processing.
Control & I/O
Spindle ON/OFF and commanded RPM (VFD), vacuum zones, dust/mist/air, clamps/fixtures, beacons, guards & Emergency.
Tool length setter on Z for automatic referencing after each change; optional tool-break input.
Configured spindle and coolant outputs with process-ready and safety interlocks.
Operator aids: Feed/Speed overrides, Pause/Resume, single-step, safe restart from last block.
03
Software workflow
Software & Workflow
- 01Load
DXF/G-code and review preview.
- 02Set origin
and verify sheet alignment.
- 03Step 3
Apply tool-radius, entry, drilling-cycle and safe-retract settings.
- 04Simulate / Dry-run
to confirm limits and path order.
- 05Run job
with monitored pauses for clamps/consumables.
- 06Save report
and notes for traceability and repeat work.
04
Interface capabilities
Key Features of Radonix CNC Software
Software & Workflow
- Import DXF/G-code, preview stone toolpaths and apply configured tool-radius and depth offsets.
- Configure routing entries, drilling cycles, safe retracts and coolant sequencing.
- Corner smoothing and arc handling to maintain cut speed and edge quality.
- Priority ordering (inner → outer) and automatic pause points for clamp moves or checks.
- Job Queue & Repeat for batches; simulation / dry-run before cutting.
- Run reports: cycle time, path length, tool use, pauses and restarts; operator notes are saved with the job.
Key Capabilities (at a glance)
- DXF/G-code import and nesting-friendly workflow
- Tool-radius compensation, entry rules, drilling cycles and safe retracts
- Single-block step, dry run (spindle off), and resume from pause
- Soft limits, interlocks, and E-stop handling
- Automatic job logs and quick recall
- Surface Scan capability for automatic Z-axis compensation according to the irregularities of the workpiece surface.
- Ability to modify the executable file (Rotate, Scale, Flip, Fit Dimension).
- Real-time reference displacement (Displace Reference) during job execution.
- Independent homing function for Gantry motors, enabling automatic orthogonality (X,Y) or alignment (Z) calibration.
- Dual-purpose sensor support for using a single sensor as both Home and Limit switch simultaneously.Power-loss recovery (Restart from line): Safely resumes from the last executed G-code line with automatic re-arm of spindle, vacuum, and safe Z re-entry.
Three-axis XYZ motion for stone routing, profiling, drilling and engraving
Three-axis path preview and controlled tool-depth management
Configured spindle and coolant control with interlocks and process monitoring
Tool-length and Z-reference management with safe retract and recovery routines
Automatic Z tool-offset sensing (tool setter) & wear compensation
3D toolpath & rotary visualization for verification before cutting
Floor depth restriction, safe Pause/Resume, restart from line
Surface Scan capability for automatic Z-axis compensation according to the irregularities of the workpiece surface.
Real-time reference displacement (Displace Reference) during job execution.
Independent homing function for Gantry motors, enabling automatic orthogonality (X,Y) or alignment (Z) calibration.
Dual-purpose sensor support for using a single sensor as both Home and Limit switch simultaneously.Power-loss recovery (Restart from line): Safely resumes from the last executed G-code line with automatic re-arm of spindle, vacuum, and safe Z re-entry.
05
Technical reference
Typical Specifications
| Area | Spec |
| Axes / Modes | XYZ |
| File Formats | DXF, standard G-code |
| Compensation | Tool-radius offset, corner smoothing and arc tolerance |
| Performance | High look-ahead planner; steady velocity on arcs |
| I/O | Spindle, Safety relays , Solenoid Valve , Jacks |
| Work Offsets | Multiple origins for sheet/remainder reuse |
| Reports | Time, path length, drilling cycles, alarms and notes |
06
Operating evidence
Videos & Demos
Real-world clips of Radonix interfaces on production machines—setup, operation, quality tips, and quick troubleshooting.
07
Compatible hardware