Select Region

call now
Get a Quote

menu

get a qoute

Catalogue

whatsapp

Radonix CNC Controller Manufacturer Logo
XYZ STONE
  • 3-Axis
  • Used in Stone Cutting CNC machines and Routers
User Manual
Download Interface File (reg)

Introduction

One-line value prop: Production-grade routing for wood, stone, plastics, composites, and light metals—ATC, RTCP, multi-spindle support, 3D toolpath view, and Floor depth limits for safe, accurate parts.

Who uses it: Fabricators, stone processing ·
Works with: Gantry routers from 3 to 6 axes (XYZ + A/B/C), single or multi-spindle heads, and linear / rotary / jack ATC systems.
Compatible controllers: PC-SMART 4A / PC-SMART 3AS / PC-PRO LAN 4A

Supported files: DXF and standard G-code (e.g., ArtCAM / PowerMill posts)

Important: This interface does not include Torch Height Control (THC).
For live arc-voltage height control, use XYZ Cutter + THC.

Machine & Kinematics

  • 3–6 axis contouring (XYZ + A/B/C) with homing, soft limits, and work offsets (G54–G59).

  • RTCP (Rotation Tool Center Point): keeps the tool tip on the programmed path while A/B/C rotate—no reposting when you change pivots or tool lengths.

  • Supports multi-spindle heads (sync or sequential) with per-spindle RPM and offset management.

  • Integrated Automatic Tool Changer: linear, carousel/rotary, and jack types with safe clamp/unclamp sequencing.

  •  

Control & I/O

  • Spindle ON/OFF and commanded RPM (VFD), vacuum zones, dust/mist/air, clamps/fixtures, beacons, guards & Emergency.

  • Tool length setter on Z for automatic referencing after each change; optional tool-break input.

  • Per-spindle controls (ON/OFF, RPM, selection), ATC interlocks, magazine position sensors.

  • Operator aids: Feed/Speed overrides, Pause/Resume, single-step, safe restart from last block.

Software & Workflow

  • Import DXF/G-code, preview toolpaths, and apply kerf/offset automatically.
  • Lead-in/lead-out styles (arc, radial, tangential), pierce dwell, and height retract macros.
  • Corner smoothing and arc handling to maintain cut speed and edge quality.
  • Priority ordering (inner → outer) and automatic pause points for clamp moves or checks.
  • Job Queue & Repeat for batches; simulation / dry-run before cutting.
  • Run reports: cycle time, cut length, pierces, pauses/restarts; operator notes saved with the job.

Key Capabilities (at a glance)

  • DXF/G-code import and nesting-friendly workflow
  • Kerf compensation, lead-in/out rules, pierce dwell & retract
  • Single-block step, demo run (torch off), resume from pause
  • Soft limits, interlocks, and E-stop handling
  • Automatic job logs and quick recall
  • Surface Scan capability for automatic Z-axis compensation according to the irregularities of the workpiece surface.
  • Ability to modify the executable file (Rotate, Scale, Flip, Fit Dimension).
  • Real-time reference displacement (Displace Reference) during job execution.
  • Independent homing function for Gantry motors, enabling automatic orthogonality (X,Y) or alignment (Z) calibration.
  • Dual-purpose sensor support for using a single sensor as both Home and Limit switch simultaneously.Power-loss recovery (Restart from line): Safely resumes from the last executed G-code line with automatic re-arm of spindle, vacuum, and safe Z re-entry.
XYZ Stone compatible CNC controller board used for multi-axis stone cutting and routing machines
Device Slider
XYZ Stone compatible CNC controller board used for multi-axis stone cutting and routing machines

Typical Specifications

AreaSpec
Axes / ModesXYZ
File FormatsDXF, standard G-code
CompensationKerf/offset, corner smoothing, arc tolerance
PerformanceHigh look-ahead planner; steady velocity on arcs
I/OSpindle, Safety relays , Solenoid Valve , Jacks  
Work OffsetsMultiple origins for sheet/remainder reuse
ReportsTime, cut length, pierces, alarms, notes

Standard Workflow

  1. Load DXF/G-code and review preview.
  2. Set origin and verify sheet alignment.
  3. Apply settings: kerf, leads, pierce rules (no THC).
  4. Simulate / Dry-run to confirm limits and path order.
  5. Run job with monitored pauses for clamps/consumables.
  6. Save report and notes for traceability and repeat work.

Key Features of Radonix CNC Software

🔹 Up to 6 simultaneous axes (XYZ + A/B/C) across wood/stone/milling/mold/dental

 

🔹 RTCP to maintain tool-tip accuracy during 5-axis motion

 

🔹 Multi-spindle head control (sync/sequential) with per-spindle offsets & RPM

 

🔹 ATC for linear, rotary/carousel, and jack magazines with full interlocks

 

🔹 Automatic Z tool-offset sensing (tool setter) & wear compensation

 

🔹3D toolpath & rotary visualization for verification before cutting

 

🔹 Floor depth restriction, safe Pause/Resume, restart from line

 

🔹 Surface Scan capability for automatic Z-axis compensation according to the irregularities of the workpiece surface.

 

🔹Real-time reference displacement (Displace Reference) during job execution.

 

🔹Independent homing function for Gantry motors, enabling automatic orthogonality (X,Y) or alignment (Z) calibration.

 

🔹Dual-purpose sensor support for using a single sensor as both Home and Limit switch simultaneously.Power-loss recovery (Restart from line): Safely resumes from the last executed G-code line with automatic re-arm of spindle, vacuum, and safe Z re-entry.

Videos & Demos

Real-world clips of Radonix interfaces on production machines—setup, operation, quality tips, and quick troubleshooting.

Related products

These are the Radonix CNC controllers  designed to work best with this interface. Choose the recommended controller.

Radonix hardware for XY Cutter (No THC) :