Radonix interface
4-Axis CNC Controller for Stone Surface Texturing
High-throughput surface texturing with programmable raster steps and rotary orientation—perfect for uniform, repeatable “hammered” finishes.
- Axes
- 4-Axis
- Machine class
- Four-axis CNC surface-texturing and hammering machines
- Input
- DXF and standard G-code (e.g., ArtCAM / PowerMill posts)
- Controllers
- PC Smart 4APC-Pro LAN 4A
01
Interface profile
Introduction
With CAM-Pro and compatible Radonix controller hardware, the XYAC CNC controller interface coordinates planar motion and rotary hammer-head orientation for repeatable surface texturing.
- Who uses it
- architectural finishers, foundries/metal finishing, surface-prep shops.
- Works with
- 4-axis gantries (X, Y, A, C) driving a pneumatic/hydraulic hammer head; optional surface-scan sensor.
- Compatible controllers
- PC Smart 4APC-Pro LAN 4A
- Supported files
- DXF and standard G-code (e.g., ArtCAM / PowerMill posts)
02
Machine architecture
Machine & Kinematics
Machine & Kinematics
XY planar motion for raster coverage of the work area.
A-axis adjusts hammer tilt; C-axis spins/rotates the head for texture variation.
Configurable linear step (mm), radial step (mm), feed, and start/end overlap to eliminate edge marks.
Teach or type X/Y limits; “Left/Right” nudge keys for quick boundary edits.
Control & I/O
Teach or type X/Y limits; “Left/Right” nudge keys for quick boundary edits.
03
Software workflow
Software & Workflow
- 01Load
DXF/G-code and review preview.
- 02Set origin
and verify sheet alignment.
- 03Step 3
Apply hammer spacing, overlap, feed, tilt and head-rotation settings.
- 04Simulate / Dry-run
to confirm limits and path order.
- 05Run job
with monitored pauses for clamps/consumables.
- 06Save report
and notes for traceability and repeat work.
04
Interface capabilities
Key Features of Radonix CNC Software
Software & Workflow
Home axes → set X End / Y End or teach from edges; Go Zero / Go Ref as needed.
Enter Feed, LinearStep, RadialStep, Start/End Overlap.
(Optional) Scan with the height sensor to validate area, then Save job.
Run: controller rasters line-by-line; use Left/Right nudge to correct on the fly.
Stop / Resume from the next scan line; Refresh regenerates the path with current parameters.
Key Capabilities (at a glance)
Programmable LinearStep / RadialStep with overlap at boundaries
A/C rotary orientation control for texture uniformity or randomness
Teachable X/Y work envelope; quick Go Zero / Go Ref
Optional surface-scan check before running
Mid-job pause/stop/resume; parameter Refresh without reloading
Auto/Manual surface scan:
Map the workpiece with a height sensor or by teaching points, so hammering follows the true surface.
Smart Component & Path Management
Select specific parts from complex drawings and customize cutting order with intuitive control over toolpath sequencing.
3D shape preview:
See the scanned surface as a 3D model to verify coverage before you run.
Flexible Part Placement
Manually drag and drop parts onto your material sheet to accommodate irregular shapes, pre-cut stock, or remnant reuse.
Stroke spacing control:
Set the along-path spacing between hits and the row-to-row spacing for uniform texture.
Reverse Cutting Mode
Execute toolpaths in reverse to minimize material warping or adjust final exit points based on design needs.
Edge overlap:
Add configurable overlap at the start and end of each path to eliminate visible edge lines.
Partial execution:
Limit the job to chosen start/end points—or specific sections—to repair or re-hammer only where needed.
05
Technical reference
Typical Specifications
| Area | Spec |
|---|---|
| Axes | X, Y, A (tilt), C (spin) |
| Modes | Raster scan; linear & radial stepping; overlap at start/end |
| Files | Region DXF, G-code (optional); teach-from-panel supported |
| Patterning | LinearStep, RadialStep, Feed (mm/s), Start/End OverLap (°/mm) |
| Alignment | X/Y limits, Go Zero / Go Ref, Left/Right nudge; RandomRotaryReference option |
| Safety | Guards/doors, pressure OK, E-stop, over-travel; SafeY park |
| Recovery | Resume from next raster line after Stop; job Refresh with new steps |
| Reporting | Run time, covered area/lines, stops/alarms (when enabled) |
06
Operating evidence
Videos & Demos
Real-world clips of Radonix interfaces on production machines—setup, operation, quality tips, and quick troubleshooting.
07
Compatible hardware