What machines is the XY Cutter interface designed for?

The XY Cutter interface is designed for two-axis XY flat-bed plasma and oxy-fuel sheet-cutting machines. An optional Z lifter can be used for pierce-safe approach and retract movements.

Does XY Cutter include Torch Height Control (THC)?

No. XY Cutter does not include live arc-voltage Torch Height Control. Radonix recommends the XYZ Cutter + THC interface when automatic standoff control over uneven sheets is required.

How does XY Cutter ensure cut accuracy without THC?

XY Cutter supports kerf compensation, configurable lead-in and lead-out paths, pierce dwell and retract rules, corner smoothing, arc handling, look-ahead motion planning and simulation before live cutting.

Is XY Cutter suitable for production environments?

Yes. Its workflow includes job queues and repeat runs, safety interlocks, controlled pauses and resume, dry-run simulation, soft limits and production reports for cycle time, cut length, pierces and alarms.

Radonix interface / sheet cutting

2-Axis Plasma & Oxy-Fuel CNC Controller for Sheet Cutting

Accurate, repeatable flat-sheet cutting with smart pierce control and kerf compensation—without THC.

Read user manual Download interface file (REG)

Production interfaceXY motion / no THC

Axes: XY
Machine class: Flat-bed plasma / oxy-fuel
Input: DXF + standard G-code
Height control: No THC

Interface profile

Built for direct, repeatable sheet cutting

With CAM-Pro and compatible Radonix controller hardware, the two-axis CNC controller interface is designed for XY plasma and oxy-fuel sheet-cutting machines without arc-voltage THC.

Who uses it: Fabricators, HVAC and ducting, signage, and general metalwork.
Works with: Two-axis flat-bed plasma and oxy-fuel cutters. An optional Z lifter supports pierce-safe approach.
Compatible controllers: PC Smart 4A PC Smart 3AS PC-Pro LAN 4A
Supported files: DXF and standard G-code, including ArtCAM and PowerMill posts.
Important: This interface does not include Torch Height Control. For live arc-voltage height control, use XYZ Cutter + THC.

Machine architecture

Motion, I/O and safety in one operating view

Controller-to-machine architecture

Machine & kinematics

XY gantry for planar motion on sheet stock.
Optional Z lifter for approach, pierce height and retract—without closed-loop height control.
Configurable work envelope, homing routines and soft limits.

Control & I/O

High-rate step/dir motion with look-ahead planning.
I/O mapping for torch on/off, gas and oxygen valves, purge, alarms, beacons and the full E-stop chain.
Safety interlocks for doors, guards, over-travel and pressure or flow checks.
Arc-voltage inputs and THC logic are not used by this interface.

Software workflow

From drawing to monitored production

Radonix XY Cutter software interface showing a two-axis CNC cutting toolpath and operator HMI — XY Cutter operator interface

Radonix software and workflow demonstration

01
Load
Import DXF or G-code and review the toolpath preview.
02
Set origin
Verify the sheet alignment and choose the working origin.
03
Apply settings
Define kerf, leads and pierce rules without THC.
04
Simulate
Dry-run the job to confirm limits and cutting order.
05
Run
Monitor pauses for clamps, consumables and operator checks.
06
Record
Save reports and notes for traceability and repeat work.

Interface capabilities

Production functions, clearly separated

Software & workflow

Import DXF/G-code, preview toolpaths and apply kerf or offset automatically.
Lead-in and lead-out styles: arc, radial and tangential—with pierce dwell and height retract macros.
Corner smoothing and arc handling to maintain cut speed and edge quality.
Priority ordering from inner to outer, plus automatic pause points.
Job Queue & Repeat, simulation and torch-off dry-run.
Run reports for cycle time, cut length, pierces, pauses, restarts and operator notes.

At a glance

DXF/G-code import and nesting-friendly workflow.
Kerf compensation, lead rules, pierce dwell and retract.
Single-block step, demo run and resume from pause.
Soft limits, interlocks and E-stop handling.
Automatic job logs and quick recall.

Direct DXF execution

Load and execute DXF files without G-code conversion, reducing setup time.

Component and path management

Select parts from complex drawings and customize cutting order.

On-screen editing

Scale, rotate and mirror parts with live toolpath previews.

Flexible part placement

Drag parts onto irregular, pre-cut or remnant sheet stock.

Advanced pause controls

Use independent pause points before, during and after the cut.

Reverse cutting mode

Reverse toolpaths to manage material warping or final exit points.

Simulation / demo run

Test the complete toolpath without activating the torch.

Flat-sheet cutting capability

Process flat-sheet profiles from DXF or standard G-code with coordinated X/Y contour motion.

THC upgrade compatibility

This XY interface does not regulate arc voltage. Use the dedicated XYZ Cutter + THC interface when automatic Z-axis height control is required.

Technical reference

Typical specifications

Area	Specification
Axes / modes	XY, optional Z lifter; no THC
File formats	DXF and standard G-code
Compensation	Kerf/offset, corner smoothing, arc tolerance
Performance	High look-ahead planner; steady velocity on arcs
I/O	Torch, gases, beacons and safety relays
Work offsets	Multiple origins for sheet and remainder reuse
Reports	Time, cut length, pierces, alarms and notes

Operating evidence

Videos & demos

Real-world clips of Radonix interfaces on production machines—setup, operation, quality tips and quick troubleshooting.

XY Cutter interface

CNC Cutter powered by Radonix

Compatible hardware

Select Region

menu

Get a Quote

Catalogue

whatsapp