Radonix interface
3-Axis Wood-Turning CNC Controller for Rotary Machining
Import a 2D DXF profile, preview the finished spindle in 3D, and machine it on an X–Z lathe with A-axis rotation — with forward, backward, or bi-directional loading.
- Axes
- 3-Axis
- Machine class
- Three-axis XZA CNC wood-turning machines
- Input
- DXF and standard G-code (e.g., ArtCAM / PowerMill posts)
- Controllers
- PC Smart 4APC Smart 3ASPC-Pro LAN 4A
01
Interface profile
Introduction
With CAM-Pro and compatible Radonix controller hardware, the XZA CNC controller interface combines X-Z tool motion with A-axis rotation for rotary wood-turning machines.
- Who uses it
- Furniture & stair manufacturers, architectural millwork shops, custom wood-turners, prototyping labs, makerspaces, and vocational/edu programs.
- Works with
- XZA lathes (X, Z linear + A rotary), stepper or servo drives, VFD spindle control, manual/pneumatic tailstock, single-tool or router-based cutting heads.
- Compatible controllers
- PC Smart 4APC Smart 3ASPC-Pro LAN 4A
- Supported files
- DXF and standard G-code (e.g., ArtCAM / PowerMill posts)
02
Machine architecture
Machine & Kinematics
Machine & Kinematics
-
X–Z carriage with A-axis workpiece rotation.
-
Homing routines, soft limits, SafeZ retracts, and configurable work envelope.
-
Forward, backward, or both-direction loading for efficient rough/finish strategies.
Control & I/O
-
High-rate step/dir motion with look-ahead planner.
-
I/O mapping for spindle on/off, analog 0–10 V RPM, tailstock clamp, guards, beacons, and full E-stop chain.
-
Safety interlocks: door/guard, over-travel, emergency, spindle/air pressure checks.
03
Software workflow
Software & Workflow
- 01Home
X, Z, A; set SafeZ and P1/P2.
- 02Load DXF
review auto-revolved 3D preview.
- 03step-down
Enter step-down, pass count, direction, feed, and RPM.
- 04Dry-run
to confirm limits and clearance; adjust if needed.
- 05Run
and monitor; pause for inspection or chip clearance.
- 06restart from the last executed line
If interrupted, restart from the last executed line; save report & notes.
04
Interface capabilities
Key Features of Radonix CNC Software
Software & Workflow
-
Direct DXF execution (no external post); automatic revolve to 3D preview.
-
Set Z step-down, pass count, cut direction (FWD/BWD/Both), feed (mm/s), and spindle RPM.
-
Dry-run (spindle off), single-block, and restart from line for power-loss recovery.
-
Quick positions P1/P2, program origin tools, and stock alignment helpers.
-
Job logging: cycle time, path length, passes, pauses/restarts, operator notes.
Key Capabilities (at a glance)
-
DXF-to-turning with true 3D result preview
-
Multi-pass roughing/finishing with programmable step-down
-
Forward / backward / both-direction machining modes
-
VFD RPM control, SafeZ retracts, and dry-run verification
-
Resume from pause & restart from any line
Direct DXF Execution
Seamlessly load and execute DXF files without the need for G-code conversion — streamlining your workflow and reducing setup time.
Smart Component & Path Management
Select specific parts from complex drawings and customize cutting order with intuitive control over toolpath sequencing.
Interactive On-Screen Editing
Scale, rotate, and mirror parts directly within the interface — with live toolpath previews to ensure precision.
Flexible Part Placement
Manually drag and drop parts onto your material sheet to accommodate irregular shapes, pre-cut stock, or remnant reuse.
Advanced Pause Controls
Set up to three independent pause points — before the cut, during the cut, and after the cut — for manual checks or operational adjustments.
Reverse Cutting Mode
Execute toolpaths in reverse to minimize material warping or adjust final exit points based on design needs.
Display of the final workpiece in three dimensions.
Ability to select the loading direction in the forward, backward, or both directions.
05
Technical reference
Typical Specifications
| Area | Spec |
|---|---|
| Axes | X, Z + A (rotary spindle) |
| Modes | DXF revolve to 3D, multi-pass rough/finish, RPM control |
| Files | DXF (primary), G-code (optional) |
| Piercing | N/A → Turning: step-down, pass count, direction (FWD/BWD/Both) |
| Compensation | Junction smoothing, velocity planning, SafeZ retracts |
| Alignment | P1/P2 quick points, origin tools, 3D preview verification |
| Safety | Guard/door, spindle ready, tailstock clamp, E-stop, SafeZ |
| Recovery | Restart from last line; safe RPM and clearance restore |
| Reporting | Time, path length, passes, pauses/alarms, notes |
06
Operating evidence
Videos & Demos
Real-world clips of Radonix interfaces on production machines—setup, operation, quality tips, and quick troubleshooting.
07
Compatible hardware