One-line value prop: Production-grade routing for wood, stone, plastics, composites, and light metals—ATC, RTCP, multi-spindle support, 3D toolpath view, and Floor depth limits for safe, accurate parts
Who uses it: Woodworking & cabinetry · sign & exhibit · plastics/composites · mold making · stone processing · dental/CAM labs.
Works with: Gantry routers from 3 to 6 axes (XYZ + A/B/C), single or multi-spindle heads, and linear / rotary / jack ATC systems.
Compatible controllers: PC-SMART 4A / PC-SMART 3AS / PC-PRO LAN 4A
Supported files: DXF and standard G-code
3–6 axis contouring (XYZ + A/B/C) with homing, soft limits, and work offsets (G54–G59).
RTCP (Rotation Tool Center Point): keeps the tool tip on the programmed path while A/B/C rotate—no reposting when you change pivots or tool lengths.
Supports multi-spindle heads (sync or sequential) with per-spindle RPM and offset management.
Integrated Automatic Tool Changer: linear, carousel/rotary, and jack types with safe clamp/unclamp sequencing.
Spindle ON/OFF and commanded RPM (VFD), vacuum zones, dust/mist/air, clamps/fixtures, beacons, guards & Emergency.
Tool length setter on Z for automatic referencing after each change; optional tool-break input.
Per-spindle controls (ON/OFF, RPM, selection), ATC interlocks, magazine position sensors.
Operator aids: Feed/Speed overrides, Pause/Resume, single-step, safe restart from last block.
Up to 6 simultaneous axes (XYZ + A/B/C) across wood/stone/milling/mold/dental
RTCP to maintain tool-tip accuracy during 5-axis motion
Multi-spindle head control (sync/sequential) with per-spindle offsets & RPM
ATC for linear, rotary/carousel, and jack magazines with full interlocks
Automatic Z tool-offset sensing (tool setter) & wear compensation
3D toolpath & rotary visualization for verification before cutting
Floor depth restriction, safe Pause/Resume, restart from line
Home all axes; set work offset (G54); run tool-setter cycle on the current tool.
Open DXF/G-code; map layers to tools/strategies; confirm step-downs, comps, and Floor limit.
Run. The interface performs ATC, probes tool length, applies RTCP (if enabled), and executes the job with safe retracts.
Use Feed/Speed overrides and Pause/Resume as needed; restart safely from the last block.
Review and save the run report.
Coordinate XYZ + up to three rotary axes (A/B/C) across wood, stone, milling, mold-making, and dental machines—up to 6 simultaneous axes.
Keeps the tool tip exactly on the programmed path during 5-axis rotations—no re-posting when you change head lengths or pivots.
Run spindles synchronously or sequentially with per-spindle ON/OFF, RPM, offsets, and tool numbers.
Works with linear, rotary/carousel, and jack magazines—full clamp/unclamp sequencing, interlocks, tool table, and safe recovery.
Touch-setter cycles capture tool length (and optional diameter) for accurate depths and wear compensation after each change.
Preview the job in true 3D with live A/B/C angles to verify reach, orientation, and motion before cutting.
Enforces a maximum Z penetration so the tool never cuts past the programmed floor—protects the table, fixtures, and laminated stacks.
Real-world clips of Radonix interfaces on production machines—setup, operation, quality tips, and quick troubleshooting.
These are the Radonix CNC controllers designed to work best with this interface. Choose the recommended controller.
Radonix hardware for XYZ Router + Automatic tool changer
